2011-Ducati Multistrada 1200

2011 Ducati Multistrada 1200 Technical Details

ENGINE

Desmodromics

The incredible valve performances of our engines are only possible because of Ducati's unique Desmodromic system, where valve closure is activated mechanically. At high rpm it would be almost impossible for the valve to follow the steep closure profile of the cam lobe if it were relying upon a normal valve spring. With the Desmo system, the valve is closed mechanically with the same accuracy as it is opened, enabling steep cam profiles and radical cam timings. This system is used on every single Ducati power unit including our world-beating Superbike and Desmosedici MotoGP engines.

15,000 mile major service intervals

The Multistrada 1200 has been subjected to the most intensive development program ever. With the goal of setting the bar even higher, Ducati developed revolutionary new features for the 4-bikes-in-1 concept and took aim at industry benchmarks to create a model that would go the distance, both figuratively and literally.

Overdrive

The gearbox and final drive ratios have also been optimised to enable reduced fuel consumption and achieve increased riding comfort by reducing vibration. If the 1198 Superbike reaches its top speed in 6th gear, the Multistrada 1200 is able to reach it in 5th gear and maintain it effortlessly in 6th.

Emissions

On the new Testastretta 11° engine, this angle has been reduced from 41°, used in the Testastretta Evoluzione engine which powers the 1198, to just 11°. As a result, the fresh inlet charge flow is less compromised by the exiting exhaust gases, resulting in a much smoother combustion in addition to improved fuel economy and lower exhaust emissions. Unburnt hydrocarbon emissions (pre-catalyser) are reduced by up to 65% and specific fuel consumption (and consequent CO2 emissions) by up to 15% (Euro3).


Vacural® crankcases

The Testastretta 11° features vacuum die-cast crankcases, formed using Vacural® technology, a process that achieves a significant weight saving and ensures consistent wall thickness and increased strength.

Torque assisted slipper-clutch

The Multistrada 1200 features an oil bath clutch with ‘slipper’ function and super-light feel at the lever. Its design uses a progressive self-servo mechanism that presses the plates together when under drive from the engine, enabling the reduction of the clutch spring rates. This results in a much lighter clutch lever at the handlebar, ideal in stop-start traffic or long journeys. When the drive force is reversed (over-run), the same mechanism reduces the pressure on the clutch plates, enabling them to provide a race-like ‘slipper’ action, which reduces the destabilizing effect of the rear-end under aggressive down-shifting and provides a much smoother feeling when closing the throttle or down-shifting under normal riding conditions.

Ride-by-Wire

The Ride-by-Wire RbW system is an electronic interface between the twistgrip and the engine which decides the ideal power response depending on the riding mode selected and according to the rider’s throttle input. The twistgrip no longer has a throttle cable connected directly to the throttle body butterflies, but instead delivers a signal to a control unit, which in turn operates the butterfly opening. The RbW system uses three different mappings to regulate the power delivery. The three maps offer 150hp with a sports-type delivery, 150hp with a progressive delivery suitable for touring and 100hp with progressive delivery for city or off-road use.

Exhaust system

For Ducati, design is not just creating an attractive look. It is about knowing how best to combine exciting appearance with intelligent function and outstanding performance. Even the Multistrada 1200’s exhaust tail pipes are a feature that perfectly demonstrates this concept. Their innovative design is well integrated with the motorcycle’s overall shape and the positioning of the exhaust system improves overall weight distribution. The tailpipes are short so they do not impinge on the space needed for the side luggage. The internal structure of the silencer is designed to achieve the characteristic Ducati sound without compromising compliance with sound and hydrocarbon emission standards (Euro3).

Testastretta 11°

A desire to make the World Superbike engine accessible to everyone resulted in the design and creation of the brand new Testastretta 11°, a motor that's a racer at heart and yet ready for long-distance touring or everyday urban use. So named because of its minimised 11° of ‘valve overlap’ - the interval of crankshaft rotation during which both intake and exhaust valves are open at the same time - the new Desmodromic power plant not only transforms the Testastretta Evoluzione’s world championship-winning 41° configuration into a super-smooth motor for sport touring, but also improves fuel efficiency, emissions and cost of scheduled maintenance. The Testastretta 11° is an engine for all environments and the perfect ‘game-changer’ for the four-bikes-in-one concept.

Sump-guard

The bike is suitable for off-road riding. Off-road use is enabled by the extra-long travel, reduced-weight suspension, as well as a robust and effective structural sump guard in aluminium which protects the oil sump from bumpy ground.


CHASSIS

Marzocchi forks

The Multistrada 1200 uses 50mm Marzocchi front forks, featuring a special forged fork bottom and full adjustability in spring pre-load, compression and rebound damping. Front forks have 170mm of travel, the extra-long movement providing excellent comfort even when fully loaded and even if the rider decides to leave the asphalt for an off-road route.

Brembo brakes

The front brakes use twin radially-mounted Brembo four piston, two pad callipers actuated by a master cylinder with an adjustable lever. The fronts grip 320mm discs, while a single 245mm disc on the rear is gripped by a single Brembo calliper. Typical of all Ducatis, these components ensure high performance braking and set the standard in this segment. The Multistrada 1200 is also equipped with a Bosch-Brembo ABS system, optional for the standard version and fitted as original equipment on the ‘S’ version. It delivers outstanding braking performance in all conditions and provides a major contribution towards performance safety. An option to disable the ABS is available via the instrumentation, but is automatically reactivated at the next ignition-on.

Sachs rear suspension with adjustable preload

The rear is controlled by a Sachs monoshock adjustable in spring pre-load, and rebound and compression damping. Rear suspension has 170mm of travel, the extra-long movement providing excellent comfort even when fully loaded and even if the rider decides to leave the asphalt for an off-road route.

Trellis frame

The Ducati signature Trellis frame uses large diameter, light gauge tubing with two central cast aluminium sections and a Trellis rear subframe. The frame has 19% more torsional rigidity than the Multistrada 1100.

Single-sided swingarm

The single-sided rear swingarm is also a good example of Ducati’s blend of design and functional engineering. It is made using a single piece casting, with fabricated and welded sections creating a strong, hollow and lightweight component that contributes considerably to the Multistrada’s sure-footed handling.

Seat

The Multistrada 1200 seat immediately transmits a sense of comfort. Constructed in two separate sections for the rider and passenger, the design focussed on form and cushion density to ensure maximum comfort during long journeys and user-friendly lateral shaping to help give sure-footed ground contact when stationary. A confidence-inspiring passenger grab-handle offers a secure and comfortable grip.

Ergonomics

The Multistrada 1200 was subjected to an extensive ergonomic study using both CAD and repeated prototype testing, guaranteeing a high level of comfort with a fully loaded motorcycle for long-range touring. The ‘ergonomics triangle’ of handlebar, seat and footpegs has been designed for both the rider and passenger, optimising comfort while providing a commanding and upright riding position. The Multistrada 1200 feels spacious and accommodates both rider and passenger in complete comfort, even with the top case and side luggage in place. Its 1530mm (60.2in) wheelbase ensures that not only the weight of the passenger remains inside the wheelbase length, but also that of the side luggage when loaded, a considerable contribution to the motorcycle’s dynamic performance. Underlining its multi-tasking intention, ergonomic attention was even applied when designing the riding position while standing on the footpegs, off-road style.

Fuel tank

The fuel tank has been developed using a new moulding technology which enables a favourable balance between capacity and weight. Subject to riding style, the 20 litre (5.3 gallon US) capacity can provide up to 400km (250 mile) of motorcycle pleasure between fuel stops by returning approximately 47mpg (US) (56mpg UK) at a constant 75mph (120km/h).

Magnesium front subframe

The high pressure, die-cast, magnesium front subframe reduces the high, frontal weight and contributes to chassis feel and control.

Lightweight construction

Constantly reducing weight is part of the design brief for all Ducati models. Less weight enables maximum performances both in terms of dynamic behaviour and safety. A lighter motorcycle will brake in a shorter distance, accelerate faster and be easier to steer. Every single component of the Multistrada 1200, therefore, has been designed to achieve weight reduction without compromising its load-bearing capacity. With a dry weight of just 189kg (417lb) the Multistrada 1200 is lighter than any other road enduro, touring or sport touring bike currently available in this category. The lightweight and excellent chassis set-up ensures exceptional handling, a key factor for Sport, Touring, Urban or Enduro riding.


EQUIPMENT

ABS

The Multistrada 1200 offers an optional Bosch-Brembo ABS system, which is fitted as original equipment on the ‘S’ version. It delivers outstanding braking performance in all conditions and provides a major contribution towards performance safety. An option to disable the ABS is available via the instrumentation, but is automatically reactivated at the next ignition-on.

Lighting

The headlight is a characteristic feature of the face of the Multistrada 1200, its symmetrical layout uses four halogen lamps, two for low and two for high beam to provide excellent illumination. In addition, the front and rear side lights use LEDs, and feature a special shape of intense light guidance, making the motorcycle more visible to other road users.



Magnesium alloy covers

The weight-saving cam covers in magnesium-alloy are evident by their gold colour.


DTC

The racing-derived DTC is a highly intelligent system which acts as a filter between the rider’s right hand and the rear tyre. Within milliseconds, DTC is able to detect and then control rear wheel-spin, considerable increasing the bike’s safety and performance. The system offers eight ‘levels of sensitivity’, each programmed with a level of rear wheel-spin tolerance in line with progressive levels of riding skills classified from one to eight. Level one is programmed to offer the least amount of interaction while level eight uses the most amount of interaction. DTC is an integral part of the pre-programmed Riding Modes on the Multistrada 1200; however, its setting can be customised by the rider.

Pirelli Scorpion Trail

Ducati’s technical partner, Pirelli, worked alongside the Multistrada’s engineers throughout the project, developing the new Pirelli Scorpion Trail tyres specifically for the Multistrada 1200. The new tyres represent the first ever dual compound for on/off road use with a harder compound central section. Combined with a special tread design and carcass structure, their 190/55 section delivers racing performance on the road in terms of grip and lean angles, while ensuring high mileage for touring and good off-road performance. The new generation tyres are purposely designed for the Multistrada’s four-bikes-in-one concept.

Adjustable screen

The Multistrada 1200’s screen is designed with 60mm of vertical adjustment to ensure efficient wind protection for all rider heights and effortless high-speed riding over long distances.

Power sockets

Two 12v power outlets situated on either side of the area below the rider’s seat can be used to power up to 8A (fused) accessories such as thermal apparel, intercoms or mobile phone chargers. In addition, a special connection point for powering the GARMIN satellite navigator (optional feature) is situated near the instrumentation.

On-board computer

The on-board computer system is made up of a large, high visibility LCD with the main data and a dot-matrix circular LCD which visualises various functions according to whether the bike is stationary or moving.

Stowage

Two handy onboard stowage areas are built into the motorcycle, one suitable for mobile phones or toll road tickets situated in the right cockpit side panel and a larger 3 litre area situated under the passenger seat.



CONCEPT

Enduro

If the route leaves the beaten track, the Multistrada 1200 is ready to take it in its stride. Agile, lightweight and with high, wide handlebars, serrated footrests, stylish sump guard and specially designed tyres, the Multistrada also features an Enduro riding mode which instantly delivers a smooth 100hp. With DTC reset to an off-road suitable level for less intervention and the all-mode option to disable the ABS.

Sport

The Sport riding mode delivers an adrenalin-filled 150hp ride with sports-oriented throttle response . In character with its Superbike bloodline, DTC immediately adjusts to a level for expert riders whose ‘comfort zone’ is a little closer to the limit. Ducati's racing experience combined with first-rate components makes riding the Multistrada 1200 a pure motorcycling thrill and a dream come true for those searching for best-in-class performance as well as comfort.

Touring

While the Touring riding mode is also programmed to produce 150hp, the power characteristics are designed in a configuration that delivers a smoother and more user-friendly throttle response. Active safety is already available with the advanced ABS system, but in Touring mode it is further enhanced by increasing DTC intervention to a level specifically intended for a relaxing ride.

Urban

As navigation of the urban jungle can require an even more user-friendly motorcycle, the Urban riding mode instantly transforms the Multistrada 1200 into the most manageable, practical and desirable everyday transport. Power output is adjusted to 100hp and DTC is further enhanced to provide increased intervention during the most chaotic of stop-start traffic.

Endless transformations

The new Ducati Multistrada 1200 combines innovative design and unprecedented technology to unleash four-bikes-in-one. Sport, Touring, Urban and Enduro riding modes now enable a truly enjoyable and customisable riding experience separated by just one click. The ground-breaking design makes instant adjustment to power and torque delivery in addition to electronic adjustment of suspension settings and traction control, transforming the Multistrada 1200 to the rider’s needs, and not the other way around. Hailed as a true ‘game-changing’ motorcycle, the technologically-advanced Multistrada 1200 introduces the new 150hp Testastretta 11° engine, and advanced ergonomics to be powerful, playful and a comfortable and versatile adventure on two wheels.

2011 Ducati Multistrada 1200 PRESS RELEASE

Updates for Superbike, Monster and Streetfighter

With an impressive exhibition presence of approximately 400m2, stand D-040 in hall 8 of Cologne's INTERMOT 2010 show now plays host to exciting new arrivals in the Superbike family in addition to new colours and updates for both the Streetfighter and Monster range. With new models, accessories and apparel, the Italian motorcycle manufacturer from Bologna is showing a wide range of new 2011 products at this major international show.

"We decided to consolidate our presence here in Cologne because we believe in the importance of this exhibition event, which opens the European motor show season," stated Gabriele Del Torchio, President of Ducati Motor Holding, during the opening press conference. "Our presence at the show is proof of our commitment to customers in Germany and northern Europe, and underlines our aim to expand in Germany, which is the second most important market in Europe for Ducati. For this reason we decided to preview here some of the new products scheduled for 2011, such as the new additions to the Superbike family with the 848EVO and 1198 SP, and new liveries for the Monster and Streetfighter models."

Gabriele Del Torchio also commented on the results of the first eight months of 2010: "Despite a shrinking global motorcycle market, we have used Ducati's product policy and the quality of its distribution network to improve both our market share, now at 8.5%, and also to increase our sales by 5% compared to this period 2009."

A huge attendance is expected at the German show and visitors to the Ducati stand are sure to admire the innovative and ground-breaking Multistrada 1200, which made an immediate impact on the market upon debut in March 2010. The current model will not undergo any changes for 2011, confirming its proven design and high standard of quality. INTERMOT is also the first European event to celebrate the Multistrada's victory at the "Pike's Peak International Hillclimb", the famous annual race held high in the Colorado mountains, where riders have to quickly adapt to changing road surfaces. The Multistrada on which American, Greg Tracy, took victory has been specially flown in to Cologne from the US so that fans can share in this major celebration and see further proof of the Multistrada 1200's incredible versatility.

Important additions to the Ducati Superbike family are on show in an exclusive preview of the 2011 range, including the new 848EVO which boasts 140hp and is equipped with Brembo Monobloc callipers and steering damper. The performance-enhanced model celebrates the INTERMOT show by revealing a stunning new "arctic white" livery with sporty red wheels and red frame.

The standard 1198 is also ready to satisfy an ever more demanding market, with the addition of Ducati Traction Control (DTC), the Ducati Data Analyser (DDA) and the brand new Ducati Quick Shift (DQS) fitted as standard equipment on all versions. For 2011, the improved 1198 is joined by the exciting new 1198 SP, which enhances the previous 'S' version by rolling out equipped with DTC, DQS, DDA, Ohlins TTX rear suspension, slipper clutch and aluminium fuel tank in addition to the usual Ohlins front suspension, forged Marchesini wheels and lightweight carbon fibre components.

The 2011 Streetfighter S looks impressive in its new colour schemes of red with red frame or diamond black with racing black frame, both with black wheels. A black radiator cover on all versions completes the Streetfighter's aesthetic updates.

Enhanced comfort and safety, in addition to new colour schemes, headline the main updates to Ducati's naked icon, the Monster. The entry level 696 gets new 43mm Marzocchi forks and enhanced ergonomics, including 20mm higher handlebars and a new rear sub-frame designed to accept the user-friendly passenger grab-rail kit available as a Ducati Performance accessory. The Monster 696 presents the two new colour schemes of "dark stealth" and "stone white", perfectly complementing the new matte chrome handlebar finish. The Monster 796, which was launched in April 2010 as an early entry model year 2011, also adopts Marzocchi front suspension and continues its incredible success. Along with the Monster 1100, the 696 and 796 complete the 2011 range, confirming the family's status as a style and design icon, backed-up by 17 years of Ducati Monster heritage.

INTERMOT will be open to the public until Sunday, 10 October.

2011 Ducati Multistrada 1200 - North American Specifications
USA MSRP - $14,995 USD

Chassis
FRAME
Tubular steel Trellis frame
WHEELBASE
1530mm (60.2in)
RAKE
25°
FRONT SUSPENSION
Marzocchi 50mm fully adjustable usd forks
FRONT WHEEL TRAVEL
170mm (6.7in)
FRONT WHEEL
10-spoke in light alloy 3.50 x 17
FRONT TYRE
Pirelli Scorpion Trail 120/70 17''
REAR SUSPENSION
Progressive linkage with fully adjustable Sachs monoshock. Aluminium single-sided swingarm
REAR WHEEL TRAVEL
170mm (6.7in)
REAR WHEEL
10-spoke light alloy 6.00 x 17
REAR TYRE
Pirelli Scorpion Trail 190/55 17''
FRONT BRAKE
2 x 320mm semi-floating discs, radially mounted Brembo callipers, 4-piston, 2-pad
REAR BRAKE
245mm disc, 2-piston caliper
FUEL TANK CAPACITY
20l - 5.3 gallon (US)
DRY WEIGHT
189kg (417lb)
INSTRUMENTS
Na
WARRANTY
Na
BODY COLOUR (FRAME/WHEEL)
Red (racing grey / black) - Arctic white (racing grey / black)
VERSIONS
Dual seat, ABS optional
SEAT HEIGHT
850mm (33.5in)

DDA
DDA
Not available on this model

DTC
DTC
Standard equipment

ABS
ABS
Available upon request

Engine
TYPE
L-Twin cylinder, 4 valve per cylinder, Desmodromic, liquid cooled
DISPLACEMENT
1198.4cc
BORE X STROKE
106x67.9mm
COMPRESSION RATIO
11.5:1
POWER
150hp - 110.3kw @ 9250rpm
TORQUE
87,5lb-ft 118,7Nm @7500rpm
FUEL INJECTION
tsubishi electronic fuel injection system, Mikuni elliptical throttle bodies
EXHAUST
Stainless steel muffler with catalytic converter and 2 lambda probes, aluminium tail pipes

Transmission
GEARBOX
6 speed
RATIO
1=37/15 2=30/17 3=27/20 4=24/22 5=23/24 6=22/25
PRIMARY DRIVE
Straight cut gears, Ratio 1.84:1
FINAL DRIVE
Chain 5.30"; Front sprocket 15; Rear sprocket 40
CLUTCH
Light action, wet, multiplate clutch with hydraulic control. Self-servo action on drive, slipper action on over-run

Emissions
STANDARD
follows the US Federal Regulation

2011 Ducati Multistrada 1200 - UK Specifications
UK MSRP - Starting from £10,995 (Prices quoted are SRP's including VAT)

Chassis
FRAME
Tubular steel Trellis frame
WHEELBASE
1530mm (60.2in)
RAKE
25°
FRONT SUSPENSION
Marzocchi 50mm fully adjustable usd forks
FRONT WHEEL TRAVEL
170mm (6.7in)
FRONT WHEEL
10-spoke in light alloy 3.50 x 17
FRONT TYRE
Pirelli Scorpion Trail 120/70 17''
REAR SUSPENSION
Progressive linkage with fully adjustable Sachs monoshock. Aluminium single-sided swingarm
REAR WHEEL TRAVEL
170mm (6.7in)
REAR WHEEL
10-spoke light alloy 6.00 x 17
REAR TYRE
Pirelli Scorpion Trail 190/55 17''
FRONT BRAKE
2 x 320mm semi-floating discs, radially mounted Brembo callipers, 4-piston, 2-pad
REAR BRAKE
245mm disc, 2-piston caliper
FUEL TANK CAPACITY
20l - 5.3 gallon (US)
DRY WEIGHT
189kg (417lb)
INSTRUMENTS
Na
WARRANTY
Na
BODY COLOUR (FRAME/WHEEL)
Red (racing grey / black) - Arctic white (racing grey / black)
VERSIONS
Dual seat, ABS optional
SEAT HEIGHT
850mm (33.5in)

DDA
DDA
Not available on this model

DTC
DTC
Standard equipment

ABS
ABS
Available upon request

Engine
TYPE
L-Twin cylinder, 4 valve per cylinder, Desmodromic, liquid cooled
DISPLACEMENT
1198.4cc
BORE X STROKE
106x67.9mm
COMPRESSION RATIO
11.5:1
POWER
150hp - 110.3kw @ 9250rpm
TORQUE
87,5lb-ft 118,7Nm @7500rpm
FUEL INJECTION
tsubishi electronic fuel injection system, Mikuni elliptical throttle bodies
EXHAUST
Stainless steel muffler with catalytic converter and 2 lambda probes, aluminium tail pipes

Transmission
GEARBOX
6 speed
RATIO
1=37/15 2=30/17 3=27/20 4=24/22 5=23/24 6=22/25
PRIMARY DRIVE
Straight cut gears, Ratio 1.84:1
FINAL DRIVE
Chain 5.30"; Front sprocket 15; Rear sprocket 40
CLUTCH
Light action, wet, multiplate clutch with hydraulic control. Self-servo action on drive, slipper action on over-run

Emissions
STANDARD
Euro 3

Tweet